Jiangsu Nantong Longtao Fire-Hose Group Co., Ltd.

中文 English Русский язык Español بالعربية

Maintenance measures for fire hoses

Release Time:

2023-04-27 13:51

1、 When the water hose is connected to the water hose interface, a layer of soft protective material must be placed on it, and then it should be tightly tied with galvanized iron wire or a hose clamp.

2、 The use of water hoses. When using a water hose, a high-pressure hose should be connected closer to the water pump. The filled hose should be prevented from twisting or suddenly bending, and the hose interface should be prevented from collision and damage.

3、 Water hose laying. When laying water hoses, it is necessary to avoid sharp objects and various oils. When vertically laying water hoses towards high places, water hose hooks should be used. When laying water hoses through traffic arteries, water hose protection bridges should be placed. When passing through railways, water hoses should pass under the tracks to avoid being crushed by wheels and interrupted water supply.

4、 Prevent freezing. In the severe winter season, when the water supply needs to be suspended on the fire site, in order to prevent the water belt from freezing, the water pump needs to run slowly to maintain a small water output.

5、 Clean the water hose. After use, clean the water hose. Carefully wash the water hose conveying foam to protect the adhesive layer. In order to remove grease from the water hose, warm water or soap can be used to wash it. For frozen water hoses, they should be melted first, and then cleaned and dried. Water hoses that have not been dried should not be stored in rolls.